Quick answer

Replacing the Shark NV752 hose assembly is a DIY job of about 10 minutes. Compatible hose assemblys currently start at $5.99. Replace it As needed under normal use. Full step-by-step below.

The NV752 uses a stretch accordion hose. Before replacing it, rule out a clog inside or a split at the cuffs where it flexes most. A cracked hose body genuinely needs replacing — patches rarely hold under vacuum.

Compatible Hose Assembly for the Shark NV752

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Shark part; the rest are tested aftermarket options.

PartTypePriceRating
Vacuum cleaner hose Replacement Part for Shark Navigator Lift-Away NV350 NV351 NV352 NV355 NV356 NV356E NV357 NV360 UV440 Replace Part No.193FFJ Aftermarket $9.49 4.85★ (3,985) Buy on Amazon
Vacuum Hose Filter Compatible for Shark Navigator Lift-Away NV350 NV351 NV352 NV355 NV356E NV357 NV360 NV370 NV391 UV440 Replacement Parts Aftermarket $17.99 4.85★ (884) Buy on Amazon
Vacuum cleaner hose Replacement Part for Shark Navigator Lift-Away NV350 NV356 NV355 NV352 NV351 NV356E NV357 NV360 UV440,6.7in length Aftermarket $5.99 4.85★ (124) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

About the Shark NV752

The Shark Rotator Powered Lift-Away NV752 is a corded upright with a pod that lifts away. Its flexible hose links wand and body; a split or clog shows up as sudden suction loss or a whistle.

Step-by-Step: Replacing the Shark NV752 Hose Assembly

1
Power off and unplug
Switch off and unplug the NV752 before detaching the hose.
2
Rule out a clog
Detach both ends and run something long and blunt through the hose to clear any blockage.
3
Release the cuffs
Twist and pull each cuff off the wand and body inlet; don't force it.
4
Fit the new hose
Push the matching NV752 hose onto both fittings until each cuff seats fully.
5
Reconnect and test
Reassemble, plug in and confirm strong, whistle-free suction.

⚠ Common mistakes on the NV752

The costly NV752 mistake is buying a hose when the real problem is a clog — pass something long and blunt through first. The second is forcing the cuffs off, which can crack the fitting you're trying to keep.

✓ OEM vs aftermarket for the NV752

A genuine Shark hose matches the NV752 cuffs exactly; aftermarket hoses vary in fit and durability, so for a sealed upright the genuine part is usually worth it. Confirm the listing names NV752.

🔁 How often to replace

The Shark NV752 hose assembly should be replaced As needed under normal use — sooner with pets or daily heavy use. Signs it's due: Loss of suction, visible cracks.

How we made this page: the steps are written for the Shark NV752 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.