Replacing Your Shark NV752 Brush Roll — What You Need to Know

⏱ ~10 minutes 🔧 No special tools 🔁 Every 12-24 months Verified September 2026
Quick answer

Replacing the Shark NV752 brush roll is a DIY job of about 10 minutes. Compatible brush rolls currently start at $14.99. Replace it Every 12-24 months under normal use. Full step-by-step below.

Compatible Brush Roll for the Shark NV752

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Shark part; the rest are tested aftermarket options.

PartTypePriceRating
Vacuum Cleaner Brush Roll Belt for Shark Navigator Lift-Away NV352 NV356E S2 NV360 NV350 NV351 NV356 NV357 NV358 NV361 NV42 NV22 UV440 Replace Part No.193FFJ Aftermarket $14.99 4.65★ (676) Buy on Amazon
Filter Replacement Compatible for Shark Navigator Lift Away NV350 NV351 NV352 NV356E S2 NV355 NV356 NV358 NV360 Vacuum Cleaner Filter Brush Roll Belt Aftermarket $19.99 4.75★ (249) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Shark NV752 Brush Roll

1
Power off and flip over
Turn off your Shark NV752 and place it face-down on a soft surface to protect the finish.
2
Remove the brush roll cover
Use a coin or flathead screwdriver to release the cover clips. The cover should lift away cleanly.
3
Slide out the brush roll
The brush roll is held by end caps — pull gently toward you to disengage.
4
Cut away tangled hair/debris
Before installing the new roll, clear any debris from the housing channel.
5
Install the new brush roll
Align the new roll and press the end caps into their slots until they lock.
6
Replace cover and test
Reattach the cover, press until all clips engage, then test on carpet.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Shark reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Shark NV752 brush roll should be replaced Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear.

How we made this page: the steps are written for the Shark NV752 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.