Shark NV752 HEPA Filter Replacement: DIY Guide in Under 10 Minutes
Replacing the Shark NV752 hepa filter is a DIY job of about 10 minutes. Compatible hepa filters currently start at $14.99. Replace it Every 12 months under normal use. Full step-by-step below.
The NV752 HEPA sits downstream of the motor, so it clogs slowly but is where fine allergens accumulate. It's a different part from the front foam/felt; replace it when it stays grey after rinsing or the pleats deform.
Compatible HEPA Filter for the Shark NV752
Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Shark part; the rest are tested aftermarket options.
| Part | Type | Price | Rating | |
|---|---|---|---|---|
| NV752 AZ1002 Replacement Filters for Shark Rotator Powered Lift-Away Vacuum NV650 NV650W NV651, NV652 NV750W NV751, NV752 NV831 NV835 AX950 AX951 AX952 ZU632 AZ1000W AZ1002 AZ1002BRN, XFF650 & XHF650 | Aftermarket | $17.99 | 4.75★ (6,016) | Buy on Amazon |
| Dttery NV752 AZ1002 Replacement Filter for Shark Rotator APEX DuoClean Powered Lift-Away Vacuum AZ1000 AZ1002 AX950 AX951 AX952 NV650 NV651 NV652 NV751 NV752 NV831 NV835 ZU632 Part XFF650 XHF650 | Aftermarket | $15.99 | 4.75★ (3,099) | Buy on Amazon |
| I-clean 2 Packs Replacement NV650 HEPA Foam & Felt Filters for Shark Rotator Powered Lift-Away Vacuum Cleaner, Compatible with Shark NV752,NV751,NV750,NV651,NV650,NV652 Replaces Part # XFF650 & XHF650 | Aftermarket | $17.99 $8.99/ea |
4.65★ (2,340) | Buy on Amazon |
| Leadaybetter NV752 AZ1002 Filter Replacement for Shark Rotator Powered Lift Away Vacuum AZ1002 NV650 NV651 NV652 NV750 NV750W NV751 NV752 AX950 ZU632 AX950 AX951 AX952, Replaces Parts XFF650 & XHF650 | Aftermarket | $17.99 | 4.75★ (1,083) | Buy on Amazon |
| Fette Filter Vacuum Filter Set Compatible with Shark Rotator Powered Lift-Away NV650, NV650W, NV651, NV652, NV750W, NV751, NV752, NV831, NV835. Compare to # XFF650 & XHF650 (1 Hepa 2 Foam) | Aftermarket | $14.99 | 4.75★ (536) | Buy on Amazon |
| Replacement Filter for Shark NV752, NV751, NV750, NV650, NV651, NV652, NV765, NV831, NV835, AX950, AX951, AX952, ZU632, ZU881, AZ1000, AZ1002 (Part XFF650 & XHF650) | Aftermarket | $16.99 | 4.65★ (399) | Buy on Amazon |
As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.
About the Shark NV752
The Shark Rotator Powered Lift-Away NV752 pairs washable foam/felt pre-motor filters with a separate HEPA post-motor filter behind an exhaust panel on the body. This page covers that HEPA filter — the sealed final stage most owners forget to service.
Step-by-Step: Replacing the Shark NV752 HEPA Filter
⚠ Common mistakes on the NV752
The number-one NV752 mistake is cleaning only the foam/felt and never touching the post-motor HEPA — a clogged HEPA quietly cuts suction and leaks fine dust back into the room. The second is over-rinsing the HEPA until the pleats collapse.
✓ OEM vs aftermarket for the NV752
Genuine Shark guarantees the true-HEPA rating and fit; aftermarket HEPA filters are cheaper and fine when the listing names NV752 and says HEPA (not just foam). Refresh the foam/felt set at the same time for full filtration.
The Shark NV752 hepa filter should be replaced Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Reduced suction, musty odor.
How we made this page: the steps are written for the Shark NV752 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.