Shark HV382 Side Brush Replacement: DIY Guide in Under 10 Minutes
Replacing the Shark HV382 side brush is a DIY job of about 10 minutes. Compatible side brushs currently start at $9.99. Replace it Every 3-6 months under normal use. Full step-by-step below.
Compatible Side Brush for the Shark HV382
Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Shark part; the rest are tested aftermarket options.
| Part | Type | Price | Rating | |
|---|---|---|---|---|
| Vacuum Attachments Compatible for Shark Rocket Tool Clip HV300 HV301 HV320 HV322 HV380 HV381 HV382 HV345 HZ2002 HZ251 IC160 ZS350 ZS351 ZS352 Part No.392FFJH380 | Aftermarket | $9.99 | 4.75★ (383) | Buy on Amazon |
| Replacement Soft Brushroll for Shark ZS360 ZS361 ZS362 UV480 QS360 IF201 IF202 IF205 IC205 IF251 IF252 IF281 IF282 IF285 IR141 IR142 NV770 NV771 Vacuum | Aftermarket | $25.90 | 4.75★ (45) | Buy on Amazon |
As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.
Step-by-Step: Replacing the Shark HV382 Side Brush
⚠ Common mistakes to avoid
- Confirm the part matches your exact model number before buying — Shark reuses parts across lines.
- Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
- Don't force the part — if it resists, check alignment before applying pressure.
- Always disconnect power (or remove the battery) before any internal work.
The Shark HV382 side brush should be replaced Every 3-6 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor edge cleaning, brush not spinning.
How we made this page: the steps are written for the Shark HV382 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.