Quick answer

Replacing the Shark HV382 main brush roll is a DIY job of about 10 minutes. Compatible main brush rolls currently start at $15.99. Replace it Every 6-12 months under normal use. Full step-by-step below.

Compatible Main Brush Roll for the Shark HV382

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Shark part; the rest are tested aftermarket options.

PartTypePriceRating
Replacement Soft Brush Roll Compatible with Shark NV800 NV801 NV803 HV380 HV381 HV382 HV383 HV384Q DuoClean Vacuum Cleaner 2 Pack Aftermarket $15.99
$8.00/ea
4.55★ (98) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Shark HV382 Main Brush Roll

1
Power off
Turn off and unplug your Shark HV382 before starting.
2
Access the component
Locate the main brush roll according to your model's user manual.
3
Remove old part
Follow the model-specific removal procedure for the main brush roll.
4
Install replacement
Insert the new main brush roll and ensure it's properly seated.
5
Test performance
Power on and confirm normal operation is restored.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Shark reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Shark HV382 main brush roll should be replaced Every 6-12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Reduced pickup, tangled hair.

How we made this page: the steps are written for the Shark HV382 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.