How to Replace Tineco Floor One S5 HEPA Filter (Step-by-Step Guide)

⏱ ~10 minutes 🔧 No special tools 🔁 Every 12 months Verified October 2026
Quick answer

Replacing the Tineco Floor One S5 hepa filter is a DIY job of about 10 minutes. Replace it Every 12 months under normal use. Full step-by-step below.

Compatible HEPA Filter for the Tineco Floor One S5

“OEM” is a genuine Tineco part; the rest are tested aftermarket options.

PartType
(7 Pack) Floor One S3 Replacement HEPA Filters Compatible with Tineco iFloor 3/ Floor One S3/ Floor One S5/ Floor One S5 Pro 2, Cordless Wet Dry Vacuum Cleaner, Replacement Kit, Accessories Kit Aftermarket Buy on Amazon
(3 Pieces) iFLOOR 5 Breeze Complete HEPA Filter Compatible with Tineco Floor ONE S7 PRO/ONE S6 Smart Cordless Wet Dry Vacuum Cleaner Filter, Replacement Parts 3 Filters Aftermarket Buy on Amazon
(5 Pack) HEPA Filters Compatible With Tineco iFloor 3/ Floor One S3/ One S5/ One S5 Pro 2, Wet Dry Vacuum Cleaner Filter, Replacement Parts 5 Filters (Note: Not applicable to Floor ONE S5 Combo) Aftermarket Buy on Amazon
(3 Pieces) iFloor 3 HEPA Filter Compatible for Tineco iFloor 3/ Floor One S3/ Floor One S5/ Floor One S5 Pro 2, Lightweight Wet and Dry Vacuum, Cordless Hardwood Floor Cleaner Filter Replacement Parts Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Tineco Floor One S5 HEPA Filter

1
Power off and unplug
Turn off your Tineco Floor One S5 and unplug it from the wall. If cordless, remove the battery pack.
2
Locate the filter compartment
Find the hepa filter housing — on most Floor One S5 units it's located near the top or rear of the cyclone assembly.
3
Remove the old filter
Twist or slide out the existing hepa filter. Avoid tapping it — this releases trapped particles into the air.
4
Inspect and clean housing
Wipe the filter housing with a dry cloth. Do not use water or cleaning products inside the vacuum.
5
Insert the new filter
Align the new hepa filter with the housing guides and press firmly until it clicks into place.
6
Test suction
Plug in (or reinsert battery) and run briefly to confirm normal suction is restored.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Tineco reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Tineco Floor One S5 hepa filter should be replaced Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Reduced suction, musty odor.

How we made this page: the steps describe the standard procedure for this part type; we have not yet written a model-specific version for the Tineco Floor One S5; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.