Quick answer

Replacing the Tineco Floor One S5 brush roll is a DIY job of about 10 minutes. Compatible brush rolls currently start at $17.21. Replace it Every 12-24 months under normal use. Full step-by-step below.

Compatible Brush Roll for the Tineco Floor One S5

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Tineco part; the rest are tested aftermarket options.

PartTypePriceRating
For Brush Roll Replacement Compatible for Floor One S5 and for Floor One S5 Pro for Tineco Cordless Wet and Dry Vacuum Cleaner Parts Aftermarket $27.73 Buy on Amazon
Floor Washer Brush Roll Motor Replacement, Compatible for Tineco Floor One S5 Steam & S7 Steam, High Temperature Resistant(S7 Steam) Aftermarket $84.86 Buy on Amazon
Floor ONE S5 Blue/ONE S5 Pro Roller Brush and Filters for Tineco Floor ONE S5 / S5 Pro Cordless Wet Dry Vacuum Cleaner, Replacement Parts Include 2 Rollers, 4 Filters, 1 Cleaner Brush Aftermarket $17.21 4.95★ (0) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Tineco Floor One S5 Brush Roll

1
Power off and flip over
Turn off your Tineco Floor One S5 and place it face-down on a soft surface to protect the finish.
2
Remove the brush roll cover
Use a coin or flathead screwdriver to release the cover clips. The cover should lift away cleanly.
3
Slide out the brush roll
The brush roll is held by end caps — pull gently toward you to disengage.
4
Cut away tangled hair/debris
Before installing the new roll, clear any debris from the housing channel.
5
Install the new brush roll
Align the new roll and press the end caps into their slots until they lock.
6
Replace cover and test
Reattach the cover, press until all clips engage, then test on carpet.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Tineco reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Tineco Floor One S5 brush roll should be replaced Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear.

How we made this page: the steps are written for the Tineco Floor One S5 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.