How to Replace Shark Navigator Lift-Away NV350 Brush Roll (Step-by-Step Guide)

⏱ ~10 minutes 🔧 No special tools 🔁 Every 12-24 months Verified October 2026
Quick answer

Replacing the Shark Navigator Lift-Away NV350 brush roll is a DIY job of about 10 minutes. Replace it Every 12-24 months under normal use. Full step-by-step below.

Compatible Brush Roll for the Shark Navigator Lift-Away NV350

“OEM” is a genuine Shark part; the rest are tested aftermarket options.

PartType
First4Spares Vacuum Cleaner Brushroll Brushbar for Shark Navigator NV356E & NV42 Deluxe Aftermarket Buy on Amazon
Vacuum Cleaner Brush Roll Belt for Shark Navigator Lift-Away NV352 NV356E S2 NV360 NV350 NV351 NV356 NV357 NV358 NV361 NV42 NV22 UV440 Replace Part No.193FFJ Aftermarket Buy on Amazon
Filter Replacement Parts Compatible Shark Navigator Lift Away NV352 NV356E S2 NV360 NV350 NV351 NV355 NV356 NV357 NV358 Vacuum Cleaner Filter Brush Roll Aftermarket Buy on Amazon
Brushroll Brush Roll Bristle Bar For Shark Navigator Lift-Away NV360 NV361 NV350 NV351 NV352 NV370 NV355 NV356 S2 NV42 NV22, 1PC Roller Brush Aftermarket Buy on Amazon
Filter Replacement Compatible for Shark Navigator Lift Away NV350 NV351 NV352 NV356E S2 NV355 NV356 NV358 NV360 Vacuum Cleaner Filter Brush Roll Belt Aftermarket Buy on Amazon
Leadaybetter Brush Roll Filter Replacement for Shark Navigator Lift Away NV350 NV351 NV352 NV356E S2 NV360 NV355 NV356 NV357 NV358 Vacuum Cleaner, with Belt and Wheels Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Shark Navigator Lift-Away NV350 Brush Roll

1
Power off and flip over
Turn off your Shark Navigator Lift-Away NV350 and place it face-down on a soft surface to protect the finish.
2
Remove the brush roll cover
Use a coin or flathead screwdriver to release the cover clips. The cover should lift away cleanly.
3
Slide out the brush roll
The brush roll is held by end caps — pull gently toward you to disengage.
4
Cut away tangled hair/debris
Before installing the new roll, clear any debris from the housing channel.
5
Install the new brush roll
Align the new roll and press the end caps into their slots until they lock.
6
Replace cover and test
Reattach the cover, press until all clips engage, then test on carpet.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Shark reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Shark Navigator Lift-Away NV350 brush roll should be replaced Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear.

How we made this page: the steps describe the standard procedure for this part type; we have not yet written a model-specific version for the Shark Navigator Lift-Away NV350; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.