Quick answer

Replacing the Shark Apex DuoClean AX912 hose assembly is a DIY job of about 10 minutes. Replace it As needed under normal use. Full step-by-step below.

The AX912 uses a stretch accordion hose. Before replacing it, rule out a clog inside or a split at the cuffs where it flexes most. A cracked hose body genuinely needs replacing — patches don't hold under vacuum.

Compatible Hose Assembly for the Shark Apex DuoClean AX912

“OEM” is a genuine Shark part; the rest are tested aftermarket options.

PartType
Vacuum cleaner hose Replacement Part for Shark Navigator Lift-Away NV350 NV351 NV352 NV355 NV356 NV356E NV357 NV360 UV440 Replace Part No.193FFJ Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

About the Shark Apex DuoClean AX912

The Shark APEX DuoClean AX912 is a corded upright with a lift-away pod. Its flexible hose carries airflow between the wand and body; a split or clog shows up as sudden suction loss or a whistle.

Step-by-Step: Replacing the Shark Apex DuoClean AX912 Hose Assembly

1
Power off and unplug
Switch off and unplug the AX912 before detaching the hose.
2
Rule out a clog
Detach both ends and run something long and blunt through the hose.
3
Release the cuffs
Twist and pull each cuff off the wand and inlet; don't force it.
4
Fit the new hose
Push the matching AX912 hose onto both fittings until each cuff seats fully.
5
Reconnect and test
Reassemble, plug in and confirm strong, whistle-free suction.

⚠ Common mistakes on the Apex DuoClean AX912

The costly AX912 mistake is buying a hose when it's only clogged — pass something long and blunt through first. The second is forcing the cuffs off and cracking the fitting.

✓ OEM vs aftermarket for the Apex DuoClean AX912

A genuine Shark hose matches the AX912 cuffs exactly; aftermarket hoses vary, so for a sealed upright the genuine part is usually worth it. Confirm the listing names AX912.

🔁 How often to replace

The Shark Apex DuoClean AX912 hose assembly should be replaced As needed under normal use — sooner with pets or daily heavy use. Signs it's due: Loss of suction, visible cracks.

How we made this page: the steps are written for the Shark Apex DuoClean AX912 specifically; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.