Quick answer

Replacing the Shark Apex DuoClean AX912 brush roll is a DIY job of about 10 minutes. Replace it Every 12-24 months under normal use. Full step-by-step below.

The AX912 DuoClean rollers are held by a release cover; the soft and bristle rollers are different parts and not interchangeable. Hair wraps both, especially at the end caps — match the replacement to the roller you're changing.

Compatible Brush Roll for the Shark Apex DuoClean AX912

“OEM” is a genuine Shark part; the rest are tested aftermarket options.

PartType
Replacement Brush Roll Filters Compatible with Shark Apex DuoClean AZ1000 AZ1002 AZ1003BRN AX950 AX951 AX952 NV830 NV831 NV835 ZU881 ZU885 Vacuum,Part # 1173FT950,XFF650 and XHF650 Aftermarket Buy on Amazon
Soft Bristle Brushroll Roller Hepa Foam Filter Replacement Parts Compatible with Shark DuoClean NV800 NV800W NV801 NV801Q NV803 UV810 Vacuum Aftermarket Buy on Amazon
Brush Roller Filter Replacement Compatible with Shark Rocket APEX DuoClean Vacuum ZS360, ZS360C, ZS361C, ZS362, QS360Q Compare to Part XPSTFH380, 238FP360, XPMFK320 Aftermarket Buy on Amazon
Brush Roll Replacement Compatible with Shark Apex AX950 AX951 AZ1000 AZ1000W AZ1002 & Duoclean NV830 NV831 NV835 UV700 ZU700C ZU701 ZU780 ZU782 ZU785 ZU881, Part # 1173FT950 & 1395FC831 Aftermarket Buy on Amazon
ZAWELIYO Vacuum Cleaner Rolling Brush Replacement, Anti Hair Main Brush for Shark APEX AZ1002 AX950 AX951 AX952 Vacuum Parts Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

About the Shark Apex DuoClean AX912

The Shark APEX DuoClean AX912 is a corded upright with a dual-roller cleaner head: a soft front roller for hard-floor debris and a bristle rear roller for carpet. This page covers replacing the DuoClean brush roll(s).

Step-by-Step: Replacing the Shark Apex DuoClean AX912 Brush Roll

1
Power off and unplug
Switch off and unplug the AX912 before working on the head.
2
Open the roller cover
Release the DuoClean cover on the underside of the cleaner head to expose both rollers.
3
Lift out the roller
Remove the soft or bristle roller you're replacing and cut away wound hair.
4
Fit the matching new roller
Seat the correct roller type back into its drive and end seats.
5
Close and test
Refit the cover, plug in and confirm both rollers spin.

⚠ Common mistakes on the Apex DuoClean AX912

The AX912 mistake is ordering the wrong roller (soft vs bristle). The second is replacing a roller that only needed the wound hair trimmed from it and its bearings.

✓ OEM vs aftermarket for the Apex DuoClean AX912

Genuine Shark DuoClean rollers guarantee fit and the correct soft/bristle pairing; aftermarket sets are cheaper and fine when the listing names AX912 and specifies the roller. Buying the pair keeps both fresh.

🔁 How often to replace

The Shark Apex DuoClean AX912 brush roll should be replaced Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear.

How we made this page: the steps are written for the Shark Apex DuoClean AX912 specifically; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.