Replacing the iRobot Roomba 960 Brush Roll — Step by Step

⏱ ~10 minutes 🔧 No special tools 🔁 Every 12-24 months Verified October 2026
Quick answer

Replacing the iRobot Roomba 960 brush roll is a DIY job of about 10 minutes. Replace it Every 12-24 months under normal use. Full step-by-step below.

Compatible Brush Roll for the iRobot Roomba 960

“OEM” is a genuine iRobot part; the rest are tested aftermarket options.

PartType
Replacement Parts Accessories Kit for irobot Roomba 600 Series 694 695 677 671 690 680 660 650 620 614 595 585 564,3 Bristle & Beater Brushes, 6 Filters, 8 Side Brushes Aftermarket Buy on Amazon
11Pack Replacement Parts for iRobot Roomba 800 900 Series 805 850 860 861 864 866 870 871 880 890 891 960 980 981 985 961 Vacuum Accessories,1 Set Roller Brushes,4Filters,6 Side Brushes Aftermarket Buy on Amazon
9 Pack Replacement Parts Compatible for iRobot Roomba 800 900 Series 960 860 805 850 980 861 864 866 870 871 880 890 891 981 985 961 Vacuum Cleaner,1 Set Roller Brushes,4 Filters,4 Side Brushes Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the iRobot Roomba 960 Brush Roll

1
Power off and flip over
Turn off your iRobot Roomba 960 and place it face-down on a soft surface to protect the finish.
2
Remove the brush roll cover
Use a coin or flathead screwdriver to release the cover clips. The cover should lift away cleanly.
3
Slide out the brush roll
The brush roll is held by end caps — pull gently toward you to disengage.
4
Cut away tangled hair/debris
Before installing the new roll, clear any debris from the housing channel.
5
Install the new brush roll
Align the new roll and press the end caps into their slots until they lock.
6
Replace cover and test
Reattach the cover, press until all clips engage, then test on carpet.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — iRobot reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The iRobot Roomba 960 brush roll should be replaced Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear.

How we made this page: the steps describe the standard procedure for this part type; we have not yet written a model-specific version for the iRobot Roomba 960; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.