Quick answer

Replacing the Dyson Ball Animal 3 hose assembly is a DIY job of about 10 minutes. Replace it As needed under normal use. Full step-by-step below.

The Ball Animal 3 hose is a model-specific change-over hose, not a generic accordion. Check first for a clog or a split at the flex points; if the hose body is cracked it needs the Ball Animal 3-specific replacement to match the fittings.

Compatible Hose Assembly for the Dyson Ball Animal 3

“OEM” is a genuine Dyson part; the rest are tested aftermarket options.

PartType
Genuine DYSON DC41 Bottom Internal Hose 920682-01 OEM Buy on Amazon
Dyson Hose, Attachment Dc33 OEM Buy on Amazon
Dyson Hose, Change Over Dc41 OEM Buy on Amazon
Dyson 922625-01 Hose, Cov Assembly DC40/Up19 OEM Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

About the Dyson Ball Animal 3

The Dyson Ball Animal 3 corded upright has a change-over hose that carries suction to the wand for above-floor cleaning. A split or clog shows up as weak wand suction while the floor head still works.

Step-by-Step: Replacing the Dyson Ball Animal 3 Hose Assembly

1
Power off and unplug
Disconnect the Ball Animal 3 before removing the hose.
2
Clear or confirm the fault
Detach the hose and check for a clog or a split at the flex points.
3
Release the hose ends
Free the hose from the wand port and lower inlet at their fittings.
4
Fit the new hose
Seat the model-specific hose onto both fittings until they lock.
5
Reconnect and test
Reassemble, plug in and confirm strong wand suction.

⚠ Common mistakes on the Ball Animal 3

The Ball Animal 3 mistake is replacing the hose when it's only clogged — clear it first. The second is buying a universal hose; the Dyson change-over hose has specific ends a generic one won't fit.

✓ OEM vs aftermarket for the Ball Animal 3

A genuine Dyson hose matches the fittings exactly; aftermarket equivalents vary, so confirm the listing names the Ball Animal 3. Inspect the wand and inlets while the hose is off.

🔁 How often to replace

The Dyson Ball Animal 3 hose assembly should be replaced As needed under normal use — sooner with pets or daily heavy use. Signs it's due: Loss of suction, visible cracks.

How we made this page: the steps are written for the Dyson Ball Animal 3 specifically; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.