Quick answer

Replacing the Dyson Ball Animal 3 drive belt is a DIY job of about 10 minutes. Compatible drive belts currently start at $6.99. Replace it Every 12 months under normal use. Full step-by-step below.

For the Dyson Ball Animal 3, the drive belt is essential for transmitting power from the motor to the brush bar, ensuring effective deep cleaning by rotating the bristles.

Compatible Drive Belt for the Dyson Ball Animal 3

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Dyson part; the rest are tested aftermarket options.

PartTypePriceRating
Replacement Belts for Dyson DC17 Animal Vacuum Cleaner, Replace Parts 11710-01-02 and 911710-01 (Pack of 2) Aftermarket $6.99
$3.50/ea
4.8★ (315) Buy on Amazon
KEEPOW DC17 Replacement Belt for Dyson Animal Vacuum Cleaner, Replace Part 911710 01 02 (2 Pack) Aftermarket $6.99
$3.50/ea
4.35★ (43) Buy on Amazon
2 Replacements Dyson DC41 Belts Aftermarket $14.03 4.45★ (23) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

About the Dyson Ball Animal 3

The Dyson Ball Animal 3 is a powerful upright vacuum engineered with whole-machine filtration and strong suction, specifically designed to tackle pet hair and dander across various floor types.

Step-by-Step: Replacing the Dyson Ball Animal 3 Drive Belt

1
Unplug the vacuum
Disconnect the Dyson Ball Animal 3 before turning it over.
2
Remove the base plate
Flip the machine and remove the base-plate screws to reach the roller and belt.
3
Lift the roller and clear hair
Lift the brush roll out and strip wound hair from both ends so the new belt runs true.
4
Remove the old belt
Slip the stretched or broken belt off the motor shaft and the roller.
5
Fit the new belt
Loop the new belt onto the motor shaft first, then over the roller so it sits square.
6
Reassemble and test
Refit the roller and base plate, plug in and confirm the roller spins strongly.

⚠ Common mistakes on the Ball Animal 3

A common mistake is neglecting to replace the drive belt every 12 months, leading to reduced brush bar performance, poor suction, and potential damage to other components.

✓ OEM vs aftermarket for the Ball Animal 3

For optimal performance and longevity of your Dyson Ball Animal 3, purchasing an OEM drive belt is recommended, though high-quality compatible options can offer a cost-effective alternative.

🔁 How often to replace

The Dyson Ball Animal 3 drive belt should be replaced Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Brush roll not spinning.

How we made this page: the steps are written for the Dyson Ball Animal 3 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.