Quick answer

Replacing the Bissell PowerGlide 3071 dustbin / canister is a DIY job of about 10 minutes. Compatible dustbin / canisters currently start at $17.95. Replace it As needed under normal use. Full step-by-step below.

Compatible Dustbin / Canister for the Bissell PowerGlide 3071

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Bissell part; the rest are tested aftermarket options.

PartTypePriceRating
Replacement Dirt Tank Separator for BISSELL PowerForce Compact Bagless Vacuum for Series 2112 1520 OEM # 1607629 OEM $17.95 4.95★ (44) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Bissell PowerGlide 3071 Dustbin / Canister

1
Power off
Turn off and unplug your Bissell PowerGlide 3071 before starting.
2
Access the component
Locate the dustbin / canister according to your model's user manual.
3
Remove old part
Follow the model-specific removal procedure for the dustbin / canister.
4
Install replacement
Insert the new dustbin / canister and ensure it's properly seated.
5
Test performance
Power on and confirm normal operation is restored.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Bissell reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Bissell PowerGlide 3071 dustbin / canister should be replaced As needed under normal use — sooner with pets or daily heavy use. Signs it's due: Cracked, broken latch.

How we made this page: the steps are written for the Bissell PowerGlide 3071 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.