Replacing the Bissell PowerGlide 3071 Drive Belt — Step by Step

⏱ ~10 minutes 🔧 No special tools 🔁 Every 12 months Verified October 2026
Quick answer

Replacing the Bissell PowerGlide 3071 drive belt is a DIY job of about 10 minutes. Replace it Every 12 months under normal use. Full step-by-step below.

For the Bissell PowerGlide 3071, the drive belt is essential for transferring power from the motor to the brush roll, ensuring effective carpet agitation and should be replaced annually.

Compatible Drive Belt for the Bissell PowerGlide 3071

“OEM” is a genuine Bissell part; the rest are tested aftermarket options.

PartType
LANMU Replacement Belts Set for Bissell 3071 3067 3072 3109 TurboClean DualPro Pet/PowerForce PowerBrush Pet XL Carpet Cleaner, Replace Parts 1626502 & 1626486 Aftermarket Buy on Amazon
Replacement Belts for Bissell 3071 3072 3067 3072 3109 PowerForce PowerBrush Pet XL and TurboClean DualPro Pet Carpet Cleaner, Replace Part 1626502 (Pack of 2) Aftermarket Buy on Amazon
KEEPOW Replacement Belts Set for Bissell 3071 PowerForce PowerBrush Pet XL and TurboClean DualPro Pet 3072, 3067, 30673, 3109 Carpet Cleaner, Parts 1626502 & 1626486 (2+2 Pack) Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

About the Bissell PowerGlide 3071

The Bissell PowerGlide 3071 is a popular bagless upright vacuum known for its lightweight design, powerful multi-surface suction, and easy maneuverability.

Step-by-Step: Replacing the Bissell PowerGlide 3071 Drive Belt

1
Unplug the vacuum
Disconnect the Bissell PowerGlide 3071 before turning it over.
2
Remove the base plate
Flip the machine and remove the base-plate screws to reach the roller and belt.
3
Lift the roller and clear hair
Lift the brush roll out and strip wound hair from both ends so the new belt runs true.
4
Remove the old belt
Slip the stretched or broken belt off the motor shaft and the roller.
5
Fit the new belt
Loop the new belt onto the motor shaft first, then over the roller so it sits square.
6
Reassemble and test
Refit the roller and base plate, plug in and confirm the roller spins strongly.

⚠ Common mistakes on the PowerGlide 3071

A common mistake is neglecting to replace the drive belt annually, which can lead to reduced brush roll performance, inefficient cleaning, and potential motor strain on your Bissell PowerGlide 3071.

✓ OEM vs aftermarket for the PowerGlide 3071

For your Bissell PowerGlide 3071 drive belt, OEM parts guarantee optimal fit and longevity, though high-quality compatible options can offer a more budget-friendly alternative.

🔁 How often to replace

The Bissell PowerGlide 3071 drive belt should be replaced Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Brush roll not spinning.

How we made this page: the steps are written for the Bissell PowerGlide 3071 specifically; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.