Third-party replacements are available at a fraction of the OEM price, without sacrificing filtration performance.
The Shark HV382 brush roll should be replaced Every 12-24 months
— skipping this leads to Poor carpet pick-up, visible wear.
We've tested and ranked the best options below,
including which aftermarket brands actually hold up over time.
About the Shark HV382
The Shark Rocket HV382 is a lightweight corded stick with a single brush roll in the cleaner head. The brush roll agitates carpet and sweeps hard floors; flattened bristles and wrapped hair are what most owners replace.
🔎 Shark HV382 brush roll — what to know
The HV382 brush roll is held in the cleaner head by an end cap or cover. Wound hair around the bar and its end bearings is the usual reason it stops spinning or the head whines — often a cleanout, but a worn bar should be swapped.
✓ Buying Advice
A genuine Shark roll guarantees the right bristles and fit; aftermarket bars are cheaper and fine when the listing names HV382 (and the HV300 Rocket family). Clear the housing before fitting a new bar so it runs true.
⚠ Common Mistakes
The HV382 mistake is replacing the roll when it just needs the wound hair cut from the bar and end caps. The second is forcing the cover instead of releasing it correctly.
3 Replacement Options for the Shark HV382
We are not showing prices at the moment — check the current price on Amazon.
First4Spares Vacuum Cleaner Brushroll Brushbar for Shark Navigator NV356E & NV42 Deluxe
Compatible
WD161 Roller and Filter For Shark HydroVac MessMaster Wet Dry Vacuum Cleaner WD161 WD261 AW261 (3 Brush 6 Foam Filter Kit)
Compatible
HZ3002 Replacement Brush Roller and Filters for Shark HZ3002/ HZ3000 Vacuum Cleaner - Replace Parts XFFKHZ3000 XHFHZ3000, 1 Brush Roller 2 HEPA Filters & 2 Foam and Felt Filters
Compatible
🔍 Does Your Shark HV382 Need a New Brush Roll?
Check any symptoms you're experiencing:
Frequently Asked Questions
How often should I replace the Shark HV382 brush roll?
Shark suggests replacing the HV382 brush roll Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear. If the HV382 brush roll won't spin, cut wound hair from the bar and end caps first; replace the bar when the bristles are worn flat.
Do I need a new brush roll, or can I just clean it?
Try cleaning first: cut away hair and fibre wound around the bar and its end bearings — that revives a surprising number of 'dead' brush rolls. Replace the bar when the bristles are worn flat, it's cracked, or it stays unbalanced after cleaning.
Do I have to buy the genuine Shark part, or will a compatible one work?
Yes — a compatible (aftermarket) brush roll works well in the Shark HV382 as long as it's made for this exact model. A genuine Shark roll guarantees the right bristles and fit; aftermarket bars are cheaper and fine when the listing names HV382 (and the HV300 Rocket family). Clear the housing before fitting a new bar so it runs true.
What's the most common mistake when replacing the HV382 brush roll?
The HV382 mistake is replacing the roll when it just needs the wound hair cut from the bar and end caps. The second is forcing the cover instead of releasing it correctly.