Quick answer

Replacing the Shark IZ462H brush roll is a DIY job of about 10 minutes. Replace it Every 12-24 months under normal use. Full step-by-step below.

The IZ462H DuoClean rollers are held in the head by a release cover; the soft and bristle rollers are different parts. Hair and fibre wrap both, especially at the end caps. Match the replacement to the roller you're changing — soft vs bristle are not interchangeable.

Compatible Brush Roll for the Shark IZ462H

“OEM” is a genuine Shark part; the rest are tested aftermarket options.

PartType
First4Spares Vacuum Cleaner Brushroll Brushbar for Shark Navigator NV356E & NV42 Deluxe Aftermarket Buy on Amazon
Vacuum Cleaner Brush Roll Belt for Shark Navigator Lift-Away NV352 NV356E S2 NV360 NV350 NV351 NV356 NV357 NV358 NV361 NV42 NV22 UV440 Replace Part No.193FFJ Aftermarket Buy on Amazon
Aymthgt Replacement Brush Roller for Shark AZ3002 LA702 Upright Vacuum Aftermarket Buy on Amazon
HZ3002 Replacement Brush Roller and Filters for Shark HZ3002/ HZ3000 Vacuum Cleaner - Replace Parts XFFKHZ3000 XHFHZ3000, 1 Brush Roller 2 HEPA Filters & 2 Foam and Felt Filters Aftermarket Buy on Amazon
TELoni Vacuum Cleaner Replacement Parts Rolling Brush HEPA Filter. Compatible for Shark IZ462H, IZ483H, IZ482H, IZ440H, Vacuum Cleaner Spare Part Filters (Color : Set B) Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

About the Shark IZ462H

The Shark Vertex IZ462H is a cordless DuoClean stick, so its cleaner head runs two rollers — a soft front roller for hard-floor debris and a bristle rear roller for carpet. This page covers replacing the DuoClean brush roll(s).

Step-by-Step: Replacing the Shark IZ462H Brush Roll

1
Power off and remove the battery
Switch off and take out the battery before working on the head.
2
Open the roller cover
Release the DuoClean cover on the underside of the cleaner head to expose both rollers.
3
Lift out the roller
Remove the soft or bristle roller you're replacing and cut away wound hair from it and the housing.
4
Fit the matching new roller
Seat the correct roller type back into its drive and end seats.
5
Close, refit battery, test
Refit the cover, reinsert the battery and confirm both rollers spin.

⚠ Common mistakes on the IZ462H

The main IZ462H mistake is ordering the wrong roller (soft vs bristle) for the DuoClean head. The second is replacing a roller that only needed the wound hair trimmed from it and its bearings. Remove the battery first.

✓ OEM vs aftermarket for the IZ462H

Genuine Shark DuoClean rollers guarantee fit and the correct soft/bristle pairing; aftermarket sets are cheaper and fine when the listing names IZ462H and specifies which roller. Buying the pair keeps both fresh.

🔁 How often to replace

The Shark IZ462H brush roll should be replaced Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear.

How we made this page: the steps are written for the Shark IZ462H specifically; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.