Replacing Your Shark IX141 Brush Roll — What You Need to Know
Replacing the Shark IX141 brush roll is a DIY job of about 10 minutes. Compatible brush rolls currently start at $7.85. Replace it Every 12-24 months under normal use. Full step-by-step below.
The IX141 brush roll is direct-driven (no belt) and held in the cleaner head by an end cap. Hair wound around the bar and its end bearings is the usual reason it stops spinning or the head whines — often a cleanout, not a replacement, but a flattened bar should be swapped.
Compatible Brush Roll for the Shark IX141
Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Shark part; the rest are tested aftermarket options.
| Part | Type | Price | Rating | |
|---|---|---|---|---|
| First4Spares Vacuum Cleaner Brushroll Brushbar for Shark Navigator NV356E & NV42 Deluxe | Aftermarket | $7.85 | 4.65★ (1,022) | Buy on Amazon |
| Vacuum Cleaner Brush Roll Belt for Shark Navigator Lift-Away NV352 NV356E S2 NV360 NV350 NV351 NV356 NV357 NV358 NV361 NV42 NV22 UV440 Replace Part No.193FFJ | Aftermarket | $14.99 | 4.65★ (676) | Buy on Amazon |
| HydroVac Replacement Brush Roller Filter kit for Shark AW261 WD261 WD101 AW302 WD161 WD201 WD100 WD200 WD101 HydroVac 3 in 1 Vacuum, Compare part WDFF1 WDB1 | Aftermarket | $17.99 | 4.85★ (437) | Buy on Amazon |
| Filter Replacement Parts Compatible Shark Navigator Lift Away NV352 NV356E S2 NV360 NV350 NV351 NV355 NV356 NV357 NV358 Vacuum Cleaner Filter Brush Roll | Aftermarket | $18.99 | 4.65★ (339) | Buy on Amazon |
| Dttery 2 Brush Rolls and 4 Foam Filters Replacement for Shark WD100 WD101 WD160 WD161 WD200 WD201 WD261 AW201 AW261 AW302 HydroVac Pro XL 3 in 1 Vacuum Brushroll WDB1 WDB2 WDB1F2 | Aftermarket | $16.99 | 4.65★ (180) | Buy on Amazon |
As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.
About the Shark IX141
The Shark Rocket IX141 is a cordless stick vacuum with a single bristle brush roll in the cleaner head. The brush roll agitates carpet and sweeps hard floors; bristles flatten and hair wraps it over time, which is what most owners replace.
Step-by-Step: Replacing the Shark IX141 Brush Roll
⚠ Common mistakes on the IX141
The common IX141 mistake is replacing the brush roll when it just needs the wound hair cut away from the bar and end caps. The second is forcing the end cap instead of releasing it. Remove the battery before working on the head.
✓ OEM vs aftermarket for the IX141
A genuine Shark brush roll guarantees the right bristle stiffness and fit; aftermarket bars are cheaper and fine when the listing names IX141 (and the IX140/IX142 family). Clear the housing before fitting a new bar so it runs true.
The Shark IX141 brush roll should be replaced Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear.
How we made this page: the steps are written for the Shark IX141 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.