Quick answer

Replacing the Shark AV2001WD side brush is a DIY job of about 10 minutes. Replace it Every 3-6 months under normal use. Full step-by-step below.

The AV2001WD side brush clips or screws onto a post on the underside of the robot. Cleaning it (unwinding hair) is different from replacing it — swap the brush when the arms are bent, splayed, or no longer flick debris inward, roughly every 6-12 months.

Compatible Side Brush for the Shark AV2001WD

“OEM” is a genuine Shark part; the rest are tested aftermarket options.

PartType
Techecook 4Pack Shark Side Brush Replacement for RV850 R85 RV850BRN RV850WV RV851WV RV750 R75 RV760 RV761 RV71 72 75 ION Robot Vacuums Compare to Model RVSBK950 Aftermarket Buy on Amazon
for Shark AV1002AE, AV1010AE, AV2001, AV2001WD, AV2501AE, AV911S, AV970, AV993, QR1000SB, QR1000SG, QR1000SW, RV1000C, RV1000S, RV10… ION Robot Replacement Side Brushes (6 Pack) Aftermarket Buy on Amazon
Roller Filter Side Brush Kit Vacuum Cleaner Replacement Parts,Compatible for Shark AV2001WD RV2001WD 2002WD Cleaning Tools Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

About the Shark AV2001WD

The Shark AV2001WD AI robot uses a spinning side brush to sweep debris from edges and corners into the main brush's path. The thin arms bend and wear with use, and hair wraps the hub, so it's a regular replacement.

Step-by-Step: Replacing the Shark AV2001WD Side Brush

1
Power off and flip the robot
Turn the AV2001WD off and turn it over on a soft surface.
2
Note orientation
Check how the side brush sits so the new one flicks debris inward.
3
Remove the old brush
Unclip or unscrew the side brush from its post and unwind any wrapped hair.
4
Fit the new brush
Press or screw the new side brush onto the post in the same orientation.
5
Test
Run a short clean and confirm the side brush spins and sweeps edges.

⚠ Common mistakes on the AV2001WD

The AV2001WD mistake is replacing the side brush when it only needed hair unwound from the hub. The second is fitting it on the wrong post or upside down so the arms don't sweep inward. Note orientation before removing.

✓ OEM vs aftermarket for the AV2001WD

Genuine Shark side brushes guarantee the fit and arm stiffness; aftermarket multipacks are cheap and fine when the listing names the AV2001WD. Buy a pack, since side brushes are a routine wear item.

🔁 How often to replace

The Shark AV2001WD side brush should be replaced Every 3-6 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor edge cleaning, brush not spinning.

How we made this page: the steps are written for the Shark AV2001WD specifically; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.