Replacing Your Miele Triflex HX1 Brush Roll — What You Need to Know

⏱ ~10 minutes 🔧 No special tools 🔁 Every 12-24 months Verified September 2026
Quick answer

Replacing the Miele Triflex HX1 brush roll is a DIY job of about 10 minutes. Compatible brush rolls currently start at $11.02 (genuine Miele OEM from $178.71). Replace it Every 12-24 months under normal use. Full step-by-step below.

Compatible Brush Roll for the Miele Triflex HX1

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Miele part; the rest are tested aftermarket options.

PartTypePriceRating
Miele Upright Brush Roller Assembly - for S7, U1, 7000, Salsa, Maverick, Twist, Cat and Dog, Dynamic, Home Care, Jazz etc. OEM $178.71 4.45★ (0) Buy on Amazon
Main Roller Brush Replacement For Miele HX1 Series Vacuum Cleaner,Compatible With HX1 Pro,Cat & Dog,Select Models,Plastic Cleaning Tool Aftermarket $11.02 4.25★ (0) Buy on Amazon
Filter Main Roller Brush Bar for Miele Triflex HX1 & HX2 Cat & Dog, Pro Models, Vacuum Cleaner Accessory, HEPA Filter, 254mm*42mm Aftermarket $20.99 3.75★ (0) Buy on Amazon
INF Vacuum Cleaner Brush for Miele Triflex HX1 Pro/Triflex HX1 Cat & Dog/Triflex HX1 Se, Roller Brush for Vacuum Cleaner, for Triflex HX1 Select Vacuum Cleaner Replacement Spare Parts Aftermarket $16.03 3.55★ (0) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Miele Triflex HX1 Brush Roll

1
Power off and flip over
Turn off your Miele Triflex HX1 and place it face-down on a soft surface to protect the finish.
2
Remove the brush roll cover
Use a coin or flathead screwdriver to release the cover clips. The cover should lift away cleanly.
3
Slide out the brush roll
The brush roll is held by end caps — pull gently toward you to disengage.
4
Cut away tangled hair/debris
Before installing the new roll, clear any debris from the housing channel.
5
Install the new brush roll
Align the new roll and press the end caps into their slots until they lock.
6
Replace cover and test
Reattach the cover, press until all clips engage, then test on carpet.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Miele reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Miele Triflex HX1 brush roll should be replaced Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear.

How we made this page: the steps are written for the Miele Triflex HX1 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.