Hoover React UH73301 Brush Roll Replacement: DIY Guide in Under 10 Minutes

⏱ ~10 minutes 🔧 No special tools 🔁 Every 12-24 months Verified September 2026
Quick answer

Replacing the Hoover React UH73301 brush roll is a DIY job of about 10 minutes. Compatible brush rolls currently start at $9.99 (genuine Hoover OEM from $14.26). Replace it Every 12-24 months under normal use. Full step-by-step below.

Compatible Brush Roll for the Hoover React UH73301

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Hoover part; the rest are tested aftermarket options.

PartTypePriceRating
Hoover Upholstery and Stair Cleaning Attachment 'Nozzle Body' With Brush Strip. OEM $14.26 4.65★ (0) Buy on Amazon
Hoover Streamline Refresh Kit, Replacement Filter & Brush Roll for Hoover Streamline Hard Floor Cleaner Machine, Maintains Strong Suction & Scrubbing Performance, Easy-to-Install Replacement Parts OEM $25.99 4.65★ (0) Buy on Amazon
440013513 Brushroll End Cap with Bearing Compatible with Hoover Smartwash Pet Cleaner FH52000 FH53000 Model, Automatic Carpet Cleaner Cap for Dirt Devil & Royal Vacuum Cleaners Brushroll Parts Aftermarket $9.99 4.65★ (0) Buy on Amazon
Replacement Part For Hoover Brushroll, Uh70100/70120 On/Off Brush Shut Off # compare to part 303202001 Aftermarket $19.89 4.05★ (0) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Hoover React UH73301 Brush Roll

1
Power off and flip over
Turn off your Hoover React UH73301 and place it face-down on a soft surface to protect the finish.
2
Remove the brush roll cover
Use a coin or flathead screwdriver to release the cover clips. The cover should lift away cleanly.
3
Slide out the brush roll
The brush roll is held by end caps — pull gently toward you to disengage.
4
Cut away tangled hair/debris
Before installing the new roll, clear any debris from the housing channel.
5
Install the new brush roll
Align the new roll and press the end caps into their slots until they lock.
6
Replace cover and test
Reattach the cover, press until all clips engage, then test on carpet.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Hoover reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Hoover React UH73301 brush roll should be replaced Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear.

How we made this page: the steps are written for the Hoover React UH73301 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.