Quick answer

Replacing the Eureka PowerSpeed NEU182 drive belt is a DIY job of about 10 minutes. Compatible drive belts currently start at $6.99. Replace it Every 12 months under normal use. Full step-by-step below.

Compatible Drive Belt for the Eureka PowerSpeed NEU182

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Eureka part; the rest are tested aftermarket options.

PartTypePriceRating
KEEPOW Vacuum Belt for Eureka, Part E0205 Belt for Eureka, Power Speed Vacuum Belts fit for Eureka NEU182B, NEU182A, NEU188A, NEU181, NEU180, NEU180B, NEU182, NEU186, NEU188, 4 Pack Aftermarket $8.99
$2.25/ea
4.65★ (0) Buy on Amazon
KEEPOW Vacuum Belt and Filter Compatible with Eureka Vacuum Cleaner Powerspeed NEU180 NEU182 NEU182A NEU182B NEU186 NEU188 NEU188A NEU190 NEU192 NEU202, Part E0205 & E0202, 3 Pack Aftermarket $9.99
$3.33/ea
4.65★ (0) Buy on Amazon
Replacement Style U Belts for Eureka Airspeed, Sanitaire and The Boss Power Plus Vacuum Series, Replace Parts 83797 61120A 61120B 61120C 61120D 61120F 61120G (Pack of 2) Aftermarket $6.99
$3.50/ea
4.65★ (0) Buy on Amazon
KEEPOW Style R Replacement Belt for Eureka 4870 4872 4874 4875 4880 4885 Series Boss SmartVac, Replace Part 61110, 61110A, 61110B, 61110C (2 Pack) Aftermarket $8.99
$4.50/ea
4.65★ (0) Buy on Amazon
KEEPOW Replacement Belt Compatible with Eureka Vacuum Belt, Part E0205 Power Speed Vacuum Belts Fit for Eureka Model NEU280, NEU182A, NEU202, NEU182B, NEU188A, NEU181A, NEU182, NEU188B (3 Pack) Aftermarket $7.99
$2.66/ea
4.55★ (0) Buy on Amazon
Replacement E0205 Vacuum Belt for Eureka PowerSpeed Lightweight Vacuum Cleaner Belt Parts for Eureka Models NEU180, NEU181, NEU182, NEU182A, NEU182B, NEU186, NEU188, NEU188A, NEU190, NEU202, 2-Pack Aftermarket $6.99
$3.50/ea
4.45★ (0) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Eureka PowerSpeed NEU182 Drive Belt

1
Unplug the vacuum
Always disconnect power before any internal work on your Eureka PowerSpeed NEU182.
2
Open the base plate
Remove any screws securing the base plate and set aside.
3
Remove the brush roll
Lift out the brush roll to expose the belt underneath.
4
Remove the old belt
Slide the worn belt off the motor spindle and brush roll hub.
5
Install the new belt
Loop the new belt around the motor shaft first, then stretch over the brush roll hub.
6
Reassemble and test
Replace brush roll and base plate. Test that the brush roll spins freely.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Eureka reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Eureka PowerSpeed NEU182 drive belt should be replaced Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Brush roll not spinning.

How we made this page: the steps are written for the Eureka PowerSpeed NEU182 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.