Quick answer

Replacing the Dyson V6 hepa filter is a DIY job of about 10 minutes. Replace it Every 12 months under normal use. Full step-by-step below.

The V6 post-motor filter sits at the rear of the machine and captures fine dust after the motor. On many V6 builds it's washable but ages more slowly than the pre-filter; replace it when washing no longer restores airflow or the media is damaged.

Compatible HEPA Filter for the Dyson V6

“OEM” is a genuine Dyson part; the rest are tested aftermarket options.

PartType
VEVA 6-Pack Premium Vacuum Filters Set - Compatible with Dyson V6 Absolute Vacuums, Part # 965661 & 966741-3 Pre-Filters & 3 HEPA Filters for Enhanced Air Quality & Suction Performance Aftermarket Buy on Amazon
SCREENTRONICS Pre & Post Motor HEPA Filters Compatible Replacement for Dyson DC40 Light/Slim Ball Animal Multi Floor Origin and Total Vacuum Cleaner Part # 923587-02, 922676-01 (1 Pack) Aftermarket Buy on Amazon
Vacuum Cleaner Replacement Washable HEPA Filter. Compatible with Dyson V6 V7 V8 V10 V11 V12 V15(FRO V15) Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

About the Dyson V6

The Dyson V6 cordless stick has a post-motor filter in addition to the washable pre-motor filter in the cyclone handle. This page covers the post-motor (HEPA-grade) filter — the sealed final stage on the V6.

Step-by-Step: Replacing the Dyson V6 HEPA Filter

1
Power off
Switch the V6 off before removing the rear filter.
2
Release the post-motor filter
Locate the filter at the rear of the machine and release it.
3
Remove the old filter
Pull the post-motor filter out.
4
Fit the new (dry) filter
Seat and lock the new filter; if reusing a washed one, be sure it's fully dry.
5
Test
Power on and confirm normal suction.

⚠ Common mistakes on the V6

The V6 mistake is only ever cleaning the pre-motor filter in the handle and never the post-motor one. The second is refitting either filter damp — 24-hour air-dry, cold water only.

✓ OEM vs aftermarket for the V6

Genuine Dyson guarantees the seal that keeps the V6 truly sealed; aftermarket post filters are cheaper and fine when the listing names the V6 (its filter differs from the V7/V8). Refresh both filters together for a full reset.

🔁 How often to replace

The Dyson V6 hepa filter should be replaced Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Reduced suction, musty odor.

How we made this page: the steps are written for the Dyson V6 specifically; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.