How to Replace Dyson V15 Detect Absolute Cleaner Head (Step-by-Step Guide)

⏱ ~10 minutes 🔧 No special tools 🔁 Every 3-5 years Verified October 2026
Quick answer

Replacing the Dyson V15 Detect Absolute cleaner head is a DIY job of about 10 minutes. Replace it Every 3-5 years under normal use. Full step-by-step below.

Compatible Cleaner Head for the Dyson V15 Detect Absolute

“OEM” is a genuine Dyson part; the rest are tested aftermarket options.

PartType
Premium Laser Slim Fluffy Brush Bar Replacement for Dyson Laser Slim Fluffy Cleaner Head & Fluffy Optic Cleaner Head, Fits Dyson V12 Series, V15 Series, V15 Detect, Outsize, Gen5detect, Part 971634-01 Aftermarket Buy on Amazon
High Torque Cleaner Head Connector & Ball Wheel Replacement Parts Fit for Dyson V10 V11 V15 G5 Vacuum Cleaner Accessories Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Dyson V15 Detect Absolute Cleaner Head

1
Power down first
Switch off your Dyson V15 Detect Absolute and take the battery out if it is cordless — the head carries live contacts.
2
Find the release catch
Where the head meets the wand there is a small catch or button, usually on the underside of the joint.
3
Press and pull the head free
Hold the catch in and draw the head straight off. It should come away without force; twisting bends the connector.
4
Check the contacts
Look at the electrical contacts on both the wand and the old head. Dull or corroded pins are often the real reason a brush bar stopped turning.
5
Fit the new head
Line the new head up with the wand and push until the catch clicks. A head that is not fully seated will cut out intermittently.
6
Test the brush bar
Power on and confirm the brush bar turns and the head stays locked when you pull on it.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Dyson reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Dyson V15 Detect Absolute cleaner head should be replaced Every 3-5 years under normal use — sooner with pets or daily heavy use. Signs it's due: Brush bar no longer turns, head rattles, or the connection to the wand feels loose.

How we made this page: the steps describe the standard procedure for this part type; we have not yet written a model-specific version for the Dyson V15 Detect Absolute; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.