Dyson V11 Cleaner Head Replacement — DIY in 10 Minutes

⏱ ~10 minutes 🔧 No special tools 🔁 Every 3-5 years Verified October 2026
Quick answer

Replacing the Dyson V11 cleaner head is a DIY job of about 10 minutes. Replace it Every 3-5 years under normal use. Full step-by-step below.

Compatible Cleaner Head for the Dyson V11

“OEM” is a genuine Dyson part; the rest are tested aftermarket options.

PartType
Plush Strips + Soleplate Wheels Replacement Compatible with Dyson V6 V7 V8 V10 V11 DC62 Direct Drive Cleaner Head Strips Felt Strips Rollers Replacement Parts Aftermarket Buy on Amazon
2 Replacement Vacuum Cleaner Heads for Dyson V7/V8/V10/V11/V15 | Anti-Tangle Motor-Driven Brush Roll with LED Light Dust Detection | Quick-Release Attachments for Carpets, Hardwood Floors & Tiles Aftermarket Buy on Amazon
Ball Wheel +Plush Strips +Head Roller Set Compatible with Dyson V6 V7 V8 V10 V11 DC62 Vacuum Cleaner Head Parts 35W 50W Direct Drive Cleaner Accessories Aftermarket Buy on Amazon
Soleplate Wheels Replacement Compatible With Dyson V6 V7 V8 V10 V11 V15 DC58 DC59 DC62 Direct Drive Cleaner Head Rollers Replacement Parts(Color:1set) Aftermarket Buy on Amazon
2-Pack Replacement Vacuum Cleaner Heads, Compatible with Dyson V7 V8 V10 V11 V15, Anti-Tangle Motorized Brush Roll with LED Light, for Carpet Hardwood Tile Floors Aftermarket Buy on Amazon
Upgraded 2 Replacement Vacuum Cleaner Heads for Dyson V7 V8 V10 V11 V15 G5, Anti-Tangle Motor-Driven Brush Roll with Green LED Light, Quick-Release Design for Hardwood Floors and Short Pile Carpets Aftermarket Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Dyson V11 Cleaner Head

1
Power down first
Switch off your Dyson V11 and take the battery out if it is cordless — the head carries live contacts.
2
Find the release catch
Where the head meets the wand there is a small catch or button, usually on the underside of the joint.
3
Press and pull the head free
Hold the catch in and draw the head straight off. It should come away without force; twisting bends the connector.
4
Check the contacts
Look at the electrical contacts on both the wand and the old head. Dull or corroded pins are often the real reason a brush bar stopped turning.
5
Fit the new head
Line the new head up with the wand and push until the catch clicks. A head that is not fully seated will cut out intermittently.
6
Test the brush bar
Power on and confirm the brush bar turns and the head stays locked when you pull on it.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Dyson reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Dyson V11 cleaner head should be replaced Every 3-5 years under normal use — sooner with pets or daily heavy use. Signs it's due: Brush bar no longer turns, head rattles, or the connection to the wand feels loose.

How we made this page: the steps describe the standard procedure for this part type; we have not yet written a model-specific version for the Dyson V11; the compatible-part list comes from our own compatibility data for this model. We are not showing prices at the moment — check the current price on Amazon.