Replacing Your Dyson V10 Brush Roll — What You Need to Know

⏱ ~10 minutes 🔧 No special tools 🔁 Every 12-24 months Verified September 2026
Quick answer

Replacing the Dyson V10 brush roll is a DIY job of about 10 minutes. Compatible brush rolls currently start at $15.19. Replace it Every 12-24 months under normal use. Full step-by-step below.

Compatible Brush Roll for the Dyson V10

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Dyson part; the rest are tested aftermarket options.

PartTypePriceRating
Soft Roller Brush Replacement for Dyson V12 V15 Detect Slim Handheld Vacuum Cleaner, Roll Bar Vacuum Attachments Part No.971634-01 Aftermarket $15.19 4.25★ (631) Buy on Amazon
2 Replacement Vacuum Cleaner Heads for Dyson V7/V8/V10/V11/V15 | Anti-Tangle Motor-Driven Brush Roll with LED Light Dust Detection | Quick-Release Attachments for Carpets, Hardwood Floors & Tiles Aftermarket $35.89 4.4★ (76) Buy on Amazon
Replacement Soft Roller Compatible with Dyson V15 Gen 5 Detect and V12 V10 Slim Vacuum Series Fluffy Optic Cleaner Head, Brush Roll Replace Spare Parts No.971634-01 Aftermarket $17.99 4.75★ (34) Buy on Amazon
2-Pack Replacement Vacuum Cleaner Heads, Compatible with Dyson V7 V8 V10 V11 V15, Anti-Tangle Motorized Brush Roll with LED Light, for Carpet Hardwood Tile Floors Aftermarket $35.14
$17.57/ea		 4.65★ (5) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Dyson V10 Brush Roll

1
Power off and flip over
Turn off your Dyson V10 and place it face-down on a soft surface to protect the finish.
2
Remove the brush roll cover
Use a coin or flathead screwdriver to release the cover clips. The cover should lift away cleanly.
3
Slide out the brush roll
The brush roll is held by end caps — pull gently toward you to disengage.
4
Cut away tangled hair/debris
Before installing the new roll, clear any debris from the housing channel.
5
Install the new brush roll
Align the new roll and press the end caps into their slots until they lock.
6
Replace cover and test
Reattach the cover, press until all clips engage, then test on carpet.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Dyson reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Dyson V10 brush roll should be replaced Every 12-24 months under normal use — sooner with pets or daily heavy use. Signs it's due: Poor carpet pick-up, visible wear.

How we made this page: the steps are written for the Dyson V10 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.