How to Replace Dyson Outsize HEPA Filter (Step-by-Step Guide)

⏱ ~10 minutes 🔧 No special tools 🔁 Every 12 months Verified September 2026
Quick answer

Replacing the Dyson Outsize hepa filter is a DIY job of about 10 minutes. Compatible hepa filters currently start at $16.99. Replace it Every 12 months under normal use. Full step-by-step below.

Compatible HEPA Filter for the Dyson Outsize

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Dyson part; the rest are tested aftermarket options.

PartTypePriceRating
for Dyson DC33 Animal, DC33 All Floor Replacement Bundle Filter Kit, 1 DC33 Washable Dust Cup Primary Filter, 1 DC 33 Post Motor HEPA Exhaust Filter, Generic for 919563-02 921616-01 Aftermarket $16.99 4.85★ (1,082) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Dyson Outsize HEPA Filter

1
Power off and unplug
Turn off your Dyson Outsize and unplug it from the wall. If cordless, remove the battery pack.
2
Locate the filter compartment
Find the hepa filter housing — on most Outsize units it's located near the top or rear of the cyclone assembly.
3
Remove the old filter
Twist or slide out the existing hepa filter. Avoid tapping it — this releases trapped particles into the air.
4
Inspect and clean housing
Wipe the filter housing with a dry cloth. Do not use water or cleaning products inside the vacuum.
5
Insert the new filter
Align the new hepa filter with the housing guides and press firmly until it clicks into place.
6
Test suction
Plug in (or reinsert battery) and run briefly to confirm normal suction is restored.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Dyson reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Dyson Outsize hepa filter should be replaced Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Reduced suction, musty odor.

How we made this page: the steps are written for the Dyson Outsize specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.