Quick answer

Replacing the Bissell Pet Hair Eraser 2087 drive belt is a DIY job of about 10 minutes. Compatible drive belts currently start at $6.99. Replace it Every 12 months under normal use. Full step-by-step below.

The drive belt for your Bissell Pet Hair Eraser 2087 powers the brush roll, requiring replacement every 12 months to maintain optimal cleaning performance.

Compatible Drive Belt for the Bissell Pet Hair Eraser 2087

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Bissell part; the rest are tested aftermarket options.

PartTypePriceRating
Belts 6960W Replacement for Bissell Proheat Vacuum Model 1694W 1697 1698 1699 1799 1846 7901 7920 7950 8806 8905 and 8910 Series, Replace Parts 0150621 and 2150628 Aftermarket $6.99 4.55★ (687) Buy on Amazon
KEEPOW Replacement Belt Set Compatible with Bissell Pet Hair Eraser Vacuum Model 1650, 1650A, 2281, 2475, 2461, 24613, 27909, 2790, 2087, 20874, 2817 Series, Compare to Parts #1608840, 2 Pack Aftermarket $6.99
$3.50/ea
4.35★ (30) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

About the Bissell Pet Hair Eraser 2087

The Bissell Pet Hair Eraser 2087 is a powerful upright vacuum engineered to effectively remove pet hair and dander from various surfaces.

Step-by-Step: Replacing the Bissell Pet Hair Eraser 2087 Drive Belt

1
Unplug the vacuum
Disconnect the Bissell Pet Hair Eraser 2087 before turning it over.
2
Remove the base plate
Flip the machine and remove the base-plate screws to reach the roller and belt.
3
Lift the roller and clear hair
Lift the brush roll out and strip wound hair from both ends so the new belt runs true.
4
Remove the old belt
Slip the stretched or broken belt off the motor shaft and the roller.
5
Fit the new belt
Loop the new belt onto the motor shaft first, then over the roller so it sits square.
6
Reassemble and test
Refit the roller and base plate, plug in and confirm the roller spins strongly.

⚠ Common mistakes on the Pet Hair Eraser 2087

A common mistake is not replacing the drive belt annually, leading to reduced brush roll effectiveness and poor pet hair pickup.

✓ OEM vs aftermarket for the Pet Hair Eraser 2087

For the Bissell Pet Hair Eraser 2087, choosing an OEM drive belt ensures perfect fit and durability, though quality compatible options can offer good value.

🔁 How often to replace

The Bissell Pet Hair Eraser 2087 drive belt should be replaced Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Brush roll not spinning.

How we made this page: the steps are written for the Bissell Pet Hair Eraser 2087 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.