Quick answer

Replacing the Bissell MultiClean Allergen 2998 drive belt is a DIY job of about 10 minutes. Compatible drive belts currently start at $6.99. Replace it Every 12 months under normal use. Full step-by-step below.

Compatible Drive Belt for the Bissell MultiClean Allergen 2998

Prices pulled from Amazon and verified September 2026. “OEM” is a genuine Bissell part; the rest are tested aftermarket options.

PartTypePriceRating
LANMU Replacement Belts Compatible with Bissell MultiClean Pet Vacuum Cleaner Model 2998, 2852, 3059, 2849, 3000, 3057, 2999, Grooved Belt for Triple Action Brush Roll, Parts 1625646 (2 Pack) Aftermarket $6.99
$3.50/ea
4.65★ (0) Buy on Amazon
Replacement Belts for Bissell MultiClean Pet Vacuum Cleaner 2998 2999 2852 3059 2849 3000 3057 Grooved Belt for Triple Action Brush Roll, Replace Parts 1625646 (Pack of 2) Aftermarket $7.99
$4.00/ea
4.55★ (0) Buy on Amazon

As an Amazon Associate we may earn from qualifying purchases. Prices and availability change; the live price is shown on Amazon.

Step-by-Step: Replacing the Bissell MultiClean Allergen 2998 Drive Belt

1
Unplug the vacuum
Always disconnect power before any internal work on your Bissell MultiClean Allergen 2998.
2
Open the base plate
Remove any screws securing the base plate and set aside.
3
Remove the brush roll
Lift out the brush roll to expose the belt underneath.
4
Remove the old belt
Slide the worn belt off the motor spindle and brush roll hub.
5
Install the new belt
Loop the new belt around the motor shaft first, then stretch over the brush roll hub.
6
Reassemble and test
Replace brush roll and base plate. Test that the brush roll spins freely.

⚠ Common mistakes to avoid

  • Confirm the part matches your exact model number before buying — Bissell reuses parts across lines.
  • Never wash a filter unless it's marked washable, and dry it fully (24h) before refitting.
  • Don't force the part — if it resists, check alignment before applying pressure.
  • Always disconnect power (or remove the battery) before any internal work.
🔁 How often to replace

The Bissell MultiClean Allergen 2998 drive belt should be replaced Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Brush roll not spinning.

How we made this page: the steps are written for the Bissell MultiClean Allergen 2998 specifically; the compatible-part list is pulled from our parts database and price-checked against Amazon. Last verified September 2026.