Third-party replacements are available at a fraction of the OEM price, without sacrificing filtration performance. The Bissell CleanView 2252 drive belt should be replaced Every 12 months — skipping this leads to Brush roll not spinning.

We've tested and ranked the best options below, including which aftermarket brands actually hold up over time.

About the Bissell CleanView 2252

The Bissell CleanView 2252 is a bagless upright whose brush roll is driven by a flat rubber belt. It's a classic stretch belt that genuinely wears, so replacing it is a common CleanView maintenance job.

🔎 Bissell CleanView 2252 drive belt — what to know

The 2252 belt is reached from the underside of the nozzle. A stretched or melted belt shows up as a brush roll that turns weakly or not at all, sometimes with a burning-rubber smell if it slips on a jammed roller.

✓ Buying Advice

Match the CleanView belt by style/model number; genuine Bissell and quality aftermarket both work, but the wrong length slips. A multipack is sensible for a wear part.

⚠ Common Mistakes

The CleanView 2252 mistake is fitting a belt without clearing wound hair from the roller ends. The second is checking the belt routes around the motor shaft, not just the roller.

5 Replacement Options for the Bissell CleanView 2252

We are not showing prices at the moment — check the current price on Amazon.

Belts Replacements Compatible with Bissell Style 7/9/10/12/14 P/N 3031120 Powerforce Helix,Cleanview Swivel,Powergroom,Powerlifter Vacuum Cleaner,Replaces 2031093,3031123,32074,2 Pack
Compatible 2-Pack
Vacuum Belt Replacement for Bissell Cleanview Swivel Pet Upright Bagless/Powerlifter Vacuum Cleaner, fits Model: 2252, 2254, 22543, 2258,2259, 2260,2316, 2739, 1793, Parts # 3031120, #32074
Compatible
Part # 3031120,Replacement Belts for Bissell Powerlifter/CleanView Swivel Rewind Pet Vacuum,Fits Models 22543,2252,2254,2489,1831,2256,2258,2259,2260,1793,2489,24899,27909 (Pack of 2)
Compatible 2-Pack
Replacement Belts for Bissell 2252, 2253, 2254, 22543, 2255, 2256, 2258, 2259, 2260,2316,2489,1831,7/9/10/12/14P/NPowerlifter/CleanViewSwivel Rewind Pet Vacuum, Parts #3031120 and #32074
Compatible
4pcs Vacuum Replacement Belts for Bissell 2252, 2253, 2254, 22543, 2255, 2256, 2258, 2259, 2260, 2316, 2739, 1793, 1790, 1792, 1309, Powerlifter/CleanView Rotary Rewind Vacuum Cleaner Belt
Compatible

🔍 Does Your Bissell CleanView 2252 Need a New Drive Belt?

Check any symptoms you're experiencing:

Frequently Asked Questions

How often should I replace the Bissell CleanView 2252 drive belt?
Bissell suggests replacing the CleanView 2252 drive belt Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Brush roll not spinning. Replace the CleanView 2252 belt when the brush roll turns weakly, stops, or smells of hot rubber — clear the roller of hair so the new belt lasts.
My brush roll stopped spinning — is it always the belt?
Not always. First rule out a bare-floor (brush-off) setting and hair jammed around the roller. If the roller is clear and still won't turn while suction is normal, the belt — or the brush gear on geared models — is the likely cause. Check the belt before suspecting the motor.
Do I have to buy the genuine Bissell part, or will a compatible one work?
Yes — a compatible (aftermarket) drive belt works well in the Bissell CleanView 2252 as long as it's made for this exact model. Match the CleanView belt by style/model number; genuine Bissell and quality aftermarket both work, but the wrong length slips. A multipack is sensible for a wear part.
What's the most common mistake when replacing the CleanView 2252 drive belt?
The CleanView 2252 mistake is fitting a belt without clearing wound hair from the roller ends. The second is checking the belt routes around the motor shaft, not just the roller.