Compatible replacement drive belt options can save you up to -36.4% compared to the official Bissell part, without sacrificing filtration performance. The Bissell BigGreen 86T3 drive belt should be replaced Every 12 months — skipping this leads to Brush roll not spinning.

We've tested and ranked the best options below, including which aftermarket brands actually hold up over time.

⭐ Our Pick

KEEPOW Style 7/9/10 P/N 3031120 Replacement Belt for Bissell Vacuum, 4 Pack — Best balance of price and quality — -36% cheaper, nearly identical rating

Buy on Amazon

About the Bissell BigGreen 86T3

The Bissell Big Green 86T3 is a heavy-duty upright deep carpet cleaner. Its rotating brush roll is turned by a drive belt; when the belt stretches or snaps, the brushes stop spinning and the machine washes without agitating, leaving carpets cleaner-marked but not truly clean.

🔎 Bissell BigGreen 86T3 drive belt — what to know

The 86T3 belt is a flat drive belt on the brush-roll assembly under the machine. Because the Big Green runs wet and works hard, the belt is a genuine wear part — replace it when the brushes turn weakly, stop, or you smell hot rubber during a clean.

✓ Buying Advice

Match the Big Green 86T3 belt by Bissell part/style number; genuine and quality aftermarket belts both work, but the wrong length slips on a wet-running machine. A multipack is sensible since this belt sees hard use.

⚠ Common Mistakes

The common 86T3 mistake is fitting a new belt without clearing hair and carpet fibre wound around the brush-roll ends — the roller binds and burns the fresh belt out fast. Also make sure the machine is unplugged and empty of solution before turning it over.

OEM vs Aftermarket: Side-by-Side

The key question for most buyers: is the official Bissell part worth 0.73× the price compared to a well-reviewed compatible replacement?

Attribute OEM (Bissell) Best Aftermarket
Price $6.59 $8.99
Rating 4.65★ (29,277 reviews) 4.65★ (13,275 reviews)
Fit type Exact OEM — guaranteed Engineered compatible
Pack options Single 4-pack ($2.25/ea)
Value score 7.26 19.62
Verdict Recommended — quality gap justifies price Acceptable budget option
$6.59 OEM Price
$8.99 Best Aftermarket
-36.4% Potential Savings
4.6★ Avg Rating
44,325 Total Reviews

4 Replacement Options for the Bissell BigGreen 86T3

BISSELL Style 7/9/10/12/16 Replacement Vacuum Belts, New Genuine OEM Replacement Belts, 2 Count, Model 32074
BISSELL Style 7/9/10/12/16 Replacement Vacuum Belts, New Genuine OEM Replacement Belts, 2 Count, Model 32074
Official OEM
★★★★★ 4.65 · 29,277 reviews Highly Rated
Price: fairly priced · Value score: 7.26
KEEPOW Style 7/9/10 P/N 3031120 Replacement Belt for Bissell Vacuum, 4 Pack
KEEPOW Style 7/9/10 P/N 3031120 Replacement Belt for Bissell Vacuum, 4 Pack
Compatible ✓ Our Pick 4-Pack
★★★★★ 4.65 · 13,275 reviews Highly Rated
$2.25 per unit when buying 4-pack
Price: budget-friendly · Value score: 19.62
$8.99 $2.25/ea
Buy on Amazon
Replacement Vacuum Belts for Bissell 2910, 2910W,1986, 2987, 29878, 29879, 2806, 28062, 28068, P2283,22839,22837 PowerForce/TurboClean PowerBrush Pet Carpet Cleaner,Parts# 1606428 (2Pack)
Replacement Vacuum Belts for Bissell 2910, 2910W,1986, 2987, 29878, 29879, 2806, 28062, 28068, P2283,22839,22837 PowerForce/TurboClean PowerBrush Pet Carpet Cleaner,Parts# 1606428 (2Pack)
Compatible 2-Pack
★★★★ 4.45 · 1,086 reviews Well Rated
$3.00 per unit when buying 2-pack
Price: budget-friendly · Value score: 10.37
$5.99 $3.00/ea
Buy on Amazon
Belts 6960W Replacement for Bissell Proheat Vacuum Model 1694W 1697 1698 1699 1799 1846 7901 7920 7950 8806 8905 and 8910 Series, Replace Parts 0150621 and 2150628
Belts 6960W Replacement for Bissell Proheat Vacuum Model 1694W 1697 1698 1699 1799 1846 7901 7920 7950 8806 8905 and 8910 Series, Replace Parts 0150621 and 2150628
Compatible
★★★★★ 4.55 · 687 reviews Highly Rated
Price: fairly priced · Value score: 4.25

🔍 Does Your Bissell BigGreen 86T3 Need a New Drive Belt?

Check any symptoms you're experiencing:

Frequently Asked Questions

How often should I replace the Bissell BigGreen 86T3 drive belt?
Bissell suggests replacing the BigGreen 86T3 drive belt Every 12 months under normal use — sooner with pets or daily heavy use. Signs it's due: Brush roll not spinning. Replace the Big Green 86T3 belt when the brush roll turns weakly, stops, or smells of hot rubber — and clear wound hair at the same time so the new belt lasts.
My brush roll stopped spinning — is it always the belt?
Not always. First rule out a bare-floor (brush-off) setting and hair jammed around the roller. If the roller is clear and still won't turn while suction is normal, the belt — or the brush gear on geared models — is the likely cause. Check the belt before suspecting the motor.
Do I have to buy the genuine Bissell part, or will a compatible one work?
Yes — a compatible (aftermarket) drive belt works well in the Bissell BigGreen 86T3 as long as it's made for this exact model. Aftermarket options can save up to -36.4% versus the genuine Bissell part. Match the Big Green 86T3 belt by Bissell part/style number; genuine and quality aftermarket belts both work, but the wrong length slips on a wet-running machine. A multipack is sensible since this belt sees hard use.
How much does a Bissell BigGreen 86T3 drive belt cost?
Compatible drive belt options for the Bissell BigGreen 86T3 start around $5.99, with the genuine Bissell part around $6.59. The prices in the table above are checked against Amazon regularly; multipacks usually cost less per unit.
What's the most common mistake when replacing the BigGreen 86T3 drive belt?
The common 86T3 mistake is fitting a new belt without clearing hair and carpet fibre wound around the brush-roll ends — the roller binds and burns the fresh belt out fast. Also make sure the machine is unplugged and empty of solution before turning it over.